View Only


Get answers on all things routing, including routing portfolios and protocols. Post here or in the following product groups: 


To easily navigate to other communities, select Communities > All Communities in the navigation.

Latest Discussion Posts

  • Profile Picture

    RE: Question on BGP FlowSpec

    No it doesn't overwrite the firewall filters configured under the interface. Actually the input firewall filter "manually" defined on the interface gets processed first, and then the flowspec filter gets processed. So in a sense you can sort of say the ...

  • Hi Jack, if i have to guess, the normal ping is using inet.0 while your traceroute is not, try enabling ICMP tunneling on your LSRs, that should allow the ICMP traffic to be send through the LSP and see each one of the labels in the path. set protocols ...

  • Hi. Does a firewall filter installed via BGP FlowSpec overwrite a manually configured firewall filter on an interface? Thanks, Deepak Juniper Business Use Only

  • Profile Picture

    MPLS Static-LSP

    In the topology below PE1's loopback address, is able to ping PE2's Both PE1 and PE2 are pushing labels to their next-hop LSR's. The LSR routers then transit the labels and swap them on each hop until reaching the PHP and popping the ...

  • Ok, further investigation shows the DHCP route as secondary, and as [Access-internal/12]. However, clients on the internal irb interfaces are unable to route out via this connection when the primary one goes down. In addition, if I try to ping out from ...


  • Join the Innovators Circle community

    Lend your voice and make an impact at Juniper. 

    The Innovators Circle is a research-driven, private circle where members share feedback on a wide range of topics to help Juniper leaders make an impact on all business areas (e.g., marketing, products, digital experience, etc.). Members receive opportunities for rewards through e-gift cards and exclusive content.

  • How are we doing?

    Juniper is driving a company-wide initiative to further enhance our customers’ experience. Please tell us how we’re doing via a quick video that will be used for internal Juniper viewing only--none of it will be shared publicly!

    Please record your video here 

    Use your phone or laptop. It should take about 5-10 minutes, and you can review and re-record any segment at the click of a button. 

    Thank you in advance!