SRX Next-Gen Firewalls

 View Only

Welcome!

If you have a question or a use case, likely there are others who are experiencing or worked through the same thing. Don't hesitate to jump in and ask or share your knowledge!

Need additional guidance?  Check out these Juniper Resources.

Knowledge Base Security Advisories Technical Bulletins

Latest Discussion Posts

  • I just was with TAC support, the command has no affect on the traffic, but it did not help. Also the FPC card is not hot-swappable so we turned off the SRX and powered it on again. did not help.. So only RMA ------------------------------ Abed AL-Rahman ...

  • Hello guys root@Cloud-Firewall-DR> show version Hostname: Cloud-Firewall-DR Model: srx3400 JUNOS Software Release [11.4R13.5]​ I'm facing an issue with our SRX3400 (not sure how bad it is) after powering off the machine, and powering it on again. ...

  • Your address choice is 172.162.254.0/32 which is just a single address. You will need at least a /31 to have a device connected to the SRX and likely more if you want to hand out a dhcp pool range of more than one address. ------------------------------ ...

  • Hello, my network topology contains two pc . the first is in a vlan 10 (trusted zone) and the second I used it as if it is the internet network (untrust zone) with the ip address 172.162.254.0/32 the problem is that the irb100 interface of vlan 100 ...

  • We would need to confirm what policy would apply to the traffic that is allowed. You can look for the active session for that traffic to the /16 when it is permitted and see what policy and details are seen for the session. show security flow session ...

Polls


Announcements

  • Elevate Community Updates

    We are making improvements to the Community based on your feedback. Keep an eye out for updates as they are implemented.

    Please give us feedback any time by posting in Community Talk.

Current Members
587 Members
Hidden Member
community Admin
community Admin