SRX Next-Gen Firewalls

 View Only

Welcome!

If you have a question or a use case, likely there are others who are experiencing or worked through the same thing. Don't hesitate to jump in and ask or share your knowledge!

Need additional guidance?  Check out these Juniper Resources.

Knowledge Base Security Advisories Technical Bulletins

Latest Discussion Posts

  • Profile Picture

    2 untrust contact

    hi, 2 untrust cannot communicate with each other untrust A 82.222.18.2xx untrust B 84..43.80.3xx There are ip wifi users starting with B, ip exchange and camera nat processes starting with A, but absolutely no communication between the two untrusts ...

  • Hi kronicklez, Thank you for your reply! I already have ssh filter in place, ssh connection limit, backoff threshold, retry options backoff/lockout and tries before disconnect as well. However, I still see this in my logs: SSHD_LOGIN_FAILED: Login ...

  • Hi, security policy is for transit interface not for srx itself. To limit certain ip that can ssh to srx u need firewall filter. Thanks

  • I tried applying policy for blocking specific IPs, but so far no success. Under security policies: from-zone Untrust to-zone ArtDept policy blockIP match source-address badIP1 from-zone Untrust to-zone ArtDept policy blockIP match source-address ...

Polls


Announcements

  • Elevate Community Updates

    We are making improvements to the Community based on your feedback. Keep an eye out for updates as they are implemented.

    Please give us feedback any time by posting in Community Talk.

Current Members
582 Members
Hidden Member
community Admin
community Admin