SRX Next-Gen Firewalls

 View Only

Welcome!

If you have a question or a use case, likely there are others who are experiencing or worked through the same thing. Don't hesitate to jump in and ask or share your knowledge!

Need additional guidance?  Check out these Juniper Resources.

Knowledge Base Security Advisories Technical Bulletins

Latest Discussion Posts

  • Your address choice is 172.162.254.0/32 which is just a single address. You will need at least a /31 to have a device connected to the SRX and likely more if you want to hand out a dhcp pool range of more than one address. ------------------------------ ...

  • Hello, my network topology contains two pc . the first is in a vlan 10 (trusted zone) and the second I used it as if it is the internet network (untrust zone) with the ip address 172.162.254.0/32 the problem is that the irb100 interface of vlan 100 ...

  • We would need to confirm what policy would apply to the traffic that is allowed. You can look for the active session for that traffic to the /16 when it is permitted and see what policy and details are seen for the session. show security flow session ...

  • Hi, there I would like to migrate from Pulse Secure to Juniper Secure Connect. In J-Web wizard, when setting External Interface of Local Gateway, there is no ge-0/0/0 or pp0.0 in the drop list (external interface was set to pp0.0 for Pulse Secure). Are ...

  • This message was posted by a user wishing to remain anonymous I have an SRX340 with a simple setup: all traffic interfaces are in the global zone, all security policies apply to that zone, and all security policies are set to log. I have static routes ...

Polls


Announcements

  • Elevate Community Updates

    We are making improvements to the Community based on your feedback. Keep an eye out for updates as they are implemented.

    Please give us feedback any time by posting in Community Talk.

Current Members
587 Members
Hidden Member
community Admin
community Admin