Basically, what you need to do is bridge those two broadcast domains. So let's assume we create two EoSVR bridges. So A (For Spoke-1) & B (For Spoke-2) correspond to ports 2 & 3 on the SSR in the hub. The traffic flow would be 1. Device at Spoke 1 ...
Thanks Robert, could you explain this a little more in depth? I'm not really sure how the external switch would apply in our scenario? ------------------------------ Austin Stoffel Systems Administrator ------------------------------
Austin - MultiPoint EoSVR is a roadmap item. Check with our account team on when it will be delivered. That said, there is a workaround. If you utilize an external switch at your HUB location, you could bridge two EoSVR connections. See the rough diagram ...
Currently, the EoSVR feature is only supported for point to point layer 2 services. Is there any chance that this may change to support a point to multipoint or a many to many scenario? We have a door access system that requires that the controller ...
yes .. so it is not possible to do VRRP on 128T on the Network Interface ------------------------------ ERIC LATRIVE ------------------------------
Either the content you're seeking doesn't exist or it requires proper authentication before viewing.