Switching

Welcome! 

Get answers on switching topics, including the EX and QFX portfolios, and share your expertise.

To easily navigate to other communities, select Communities > All Communities in the navigation.

Latest Discussion Posts

  • Profile Picture

    RE: IRB

    got you! You are only connecting the EX to the SRX for management traffic. Then , yes, you only need to replace interface vlan with interface irb. ------------------------------ Yasmin Lara Juniper Ambassador JNCIE-SP, JNCIE-ENT, JNCIE-DC, ...

  • Profile Picture

    RE: IRB

    Thanks Yasmin , the setup is quiet similar and as @fb35523 mentioned if i run ​"show configuration interfaces vlan " i only see the following } unit 10 { family inet { address 10.100.10.2/27; } And rest of the config set vlans CLIENT vlan-id 17 ...

  • Profile Picture

    RE: IRB

    Only 2 logical explanation. 1. It's a top of rack switch which only requires L2 for all VLANs. the exception is the management which would require a L3 for management. 2. He has VLANs that does not require routing. i.e storage VLANs. ------------------------------ ...

  • Profile Picture

    RE: IRB

    Also, I don't understand what you mean by this: "Most of the VLAN that I have are in L2 except the management vlan which will be an IRB". But ALL VLANs are layer 2. What might be confusing is that you configure a L3 interface to connect the vlan ...

  • Profile Picture

    RE: IRB

    Sounds like this is what you have: And if that is the case, and all you are doing is replacing the EX3300 with an EX3400, all you need to do is this: Regards, ------------------------------ Yasmin Lara Juniper Ambassador JNCIE-SP, ...

Announcements

  • Welcome! How to Navigate the New Site

    Welcome to our new Juniper community! Please pardon our dust as we put the finishing touches on our new site over the next few days. A few tips: 

    1. To explore communities, select Communities in the navigation. Keep returning there to navigate. 
    2. When you log in, be sure to complete your profile and join communities to subscribe.
    3. Check out the FAQ to answer any questions. 

    We are glad you are here! 

    If you have any questions, please contact us.
Current Members
118 Members
Hidden Member
community Admin
community Admin
community Moderator