Switching

 View Only

If you have a question or a use case, there are likely others experiencing or who worked through the same thing. Don't hesitate to jump in and ask or share your knowledge!

Need additional guidance?  Check out these Juniper Resources.

Knowledge Base Day One+ Technical Bulletins

Latest Discussion Posts

  • HI all, I've got a pair of 5120s up and up, with BGP running over ISIS. BGP is up, and i've got evpn being learned on both ends. Problem is, I can't route on my VRFs using the L3VPN. My routes in each table are showing as hidden, and showing extensive ...

  • Here are the correct port configs Juniper interfaces { ge-0/0/0 { native-vlan-id 3; unit 0 { family ethernet-switching { interface-mode trunk; vlan { members [ FirstFL VLAN10 VOIP WIFI ]; Cisco interface GigabitEthernet0/2 switchport trunk native vlan ...

  • Juniper Trunk port interfaces { ge-0/0/0 { apply-macro juniper-port-profile { "Layer 2 Uplink"; } native-vlan-id 3; unit 0 { family ethernet-switching { interface-mode trunk; vlan { members [ FirstFL VLAN10 VOIP WIFI default all ] Cisco side interface ...

  • Profile Picture

    RE: Trunking to Cisco

    Relevant configs from both sides would be helpful.

  • Profile Picture

    Trunking to Cisco

    Have a Trunk port between Cisco and Juniper. Only the Native VLAN seems to be working. Native is set to VLAN3 my other VLANS 5, 10 do not work. ------------------------------ STEPHEN BAUER ------------------------------

Polls


Announcements

  • Elevate Community Updates

    We are making improvements to the Community based on your feedback. Keep an eye out for updates as they are implemented. 

    Please give us feedback any time by posting in Community Talk.