Switching

 View Only

If you have a question or a use case, there are likely others experiencing or who worked through the same thing. Don't hesitate to jump in and ask or share your knowledge!

Need additional guidance?  Check out these Juniper Resources.

Knowledge Base Day One+ Technical Bulletins

Latest Discussion Posts

  • Profile Picture

    DHCP Client on EX Switch Not Getting IP

    By: A.Vanson , 5 hours ago

    Greetings, We have an EX-2300-C-Poe switch that WAS getting and IP via DHCP when the uplink was plugged into port 0, but once moving the uplink port to SFP port 0/1/1 (copper GBIC), it's no longer getting DHCP, although it is passing traffic. Below is ...

  • Profile Picture

    ethernet-switching filter

    By: JERNEJ PRAPROTNIK , yesterday

    I have a pair of EX4600 configured as VC. I would like to add some firewall filters to specific ports (ae2 in this case), so they would be protected from outside (accessible only from Trusted-Sources prefix list ), but should be able to access the internet. ...

  • Profile Picture

    RE: VPLS on ACX Devices

    By: QURAITUL AIN , yesterday

    share your configs i can second eye it ------------------------------ QURAITUL AIN ------------------------------

  • Profile Picture

    RE: VPLS on ACX Devices

    By: QURAITUL AIN , yesterday

    Were you able to get it working? ------------------------------ QURAITUL AIN ------------------------------

  • Profile Picture

    RE: Enabling IPv6 on MX router/EX switches/SRX fi ...

    By: igor.hamzic81 , 3 days ago

    The IPv4 interface is used only for remote management(and will remain so) on the switches and only have one static route needed for this. From your answer there is nothing further needed to be done on the switches. That's great as I can then focus only ...

Polls


Announcements

  • Elevate Community Updates

    By: Jodi Meier Jodi Meier , 2 months ago

    We are making improvements to the Community based on your feedback. Keep an eye out for updates as they are implemented. 

    Please give us feedback any time by posting in Community Talk.