Upgraded the switch last night and that seems to have solved the problem. The switch was displaying "booted from backup junos" but all partitions had same firmware version on them. ------------------------------ ANKUR ------------------------------
Hi You can check this documentation to see if it includes the EX2300. https://support.juniper.net/support/eol/product/ex_series/ ------------------------------ GARY WU ------------------------------
Is there any other way to accomplish this via CLI? I have another EX4550, but it's in production and I'm afraid it might magically revert to some unusable state like this one did when I put it on the network.
What is the full configuration for interface ge-1/0/40 show configuration | display set | match ge-1/0/40 Do any vlans have all interfaces assigned show configuration vlans | display set | match all ------------------------------ Steve Puluka BSEET ...
Virtual chassis is only for the EX switch models. And the participation in a virtual chassis group is limited to specific models per group. For this group you would need ex4550, ex4500 or ex4200 as members. https://www.juniper.net/documentation/en_US/release-independent/junos/topics/topic-map/ex4550-virtual-chassis.html ...
Lend your voice and make an impact at Juniper. The Innovators Circle is a research-driven, private circle where members share feedback on a wide range of topics to help Juniper leaders make an impact on all business areas (e.g., marketing, products, digital experience, etc.). Members receive opportunities for rewards through e-gift cards and exclusive content.