I have an interface on EX3300 configured as an access port on vlan B however the device connected to that interface is still getting ip address via DHCP server on VLAN A. Switch configured for VLAN B set interfaces ge-1/0/40 unit 0 family ethernet-switching ...
Hi, As long it not announce public EOL then consider it still not EOL. Thanks
When is EOL for the EX2300 switches? Thanks in advance. GXS
Nyath...I suspect that you're getting this error is b/c you have no access or trunk ports that are configured or active for this VLAN, thus the IRB won't come up. If you do a show vlans (operational command), do you have any interfaces for VLAN 10? ...
I want it in standalone mode. I configured the whole switch, went to deploy it, but maybe it saw other vchassis units on the network? I don't know, but it somehow switched into linecard:0 mode and won't let me login locally, even though there is no master ...
Lend your voice and make an impact at Juniper. The Innovators Circle is a research-driven, private circle where members share feedback on a wide range of topics to help Juniper leaders make an impact on all business areas (e.g., marketing, products, digital experience, etc.). Members receive opportunities for rewards through e-gift cards and exclusive content.