Switching

 View Only

If you have a question or a use case, there are likely others experiencing or who worked through the same thing. Don't hesitate to jump in and ask or share your knowledge!

Need additional guidance?  Check out these Juniper Resources.

Knowledge Base Day One+ Technical Bulletins

Latest Discussion Posts

  • Following up, still have this issue. ------------------------------ MARK JOHNS ------------------------------

  • Thanks , spuluka I downloaded the log, can you help to check it? {linecard:1} qbsit@4200-24T-BMF01> show log messages Sep 7 09:45:01 4200-24T-BMF01 newsyslog[1471]: logfile turned over due to size>128K Sep 7 09:50:00 4200-24T-BMF01 eventd: sendto: Can't ...

  • Profile Picture

    VxLAN-EVPN L3VPN

    HI all, I've got a pair of 5120s up and up, with BGP running over ISIS. BGP is up, and i've got evpn being learned on both ends. Problem is, I can't route on my VRFs using the L3VPN. My routes in each table are showing as hidden, and showing extensive ...

  • Here are the correct port configs Juniper interfaces { ge-0/0/0 { native-vlan-id 3; unit 0 { family ethernet-switching { interface-mode trunk; vlan { members [ FirstFL VLAN10 VOIP WIFI ]; Cisco interface GigabitEthernet0/2 switchport trunk native vlan ...

  • Juniper Trunk port interfaces { ge-0/0/0 { apply-macro juniper-port-profile { "Layer 2 Uplink"; } native-vlan-id 3; unit 0 { family ethernet-switching { interface-mode trunk; vlan { members [ FirstFL VLAN10 VOIP WIFI default all ] Cisco side interface ...

Polls


Announcements

  • Elevate Community Updates

    We are making improvements to the Community based on your feedback. Keep an eye out for updates as they are implemented. 

    Please give us feedback any time by posting in Community Talk.