View Only


This community is currently under full moderation, meaning  all posts will be reviewed before appearing in the community. Please expect a brief delay—there is no need to post multiple times. If your post is rejected, you'll receive an email outlining the reason(s). We've implemented full moderation to control spam. Thank you for your patience and participation.

Pushing Broadcasts through the SRX 345 - verify?

This thread has been viewed 0 times
  • 1.  Pushing Broadcasts through the SRX 345 - verify?

    Posted 02-27-2022 07:53

    This is a different issue to the SIP issue I just posted. but same SRX 345
    need to push a Broadcast from the Outside to the device outside. The Device only broadcast looking for the connection. It needs to go through the SRX345
    We tried to setup an IP redistribution. I think its a Target-broadcast in the Juniper.
    I'm not seeing any denies on the SRX345. But want to confirm its goring through.
    Is there a way to setup specific logging to see successful traffic that I want to verify is making its way in/to the SRX and out the other side?

    Thank you