Security

 View Only

IMPORTANT MODERATION NOTICE

This community is currently under full moderation, meaning  all posts will be reviewed before appearing in the community. Please expect a brief delay—there is no need to post multiple times. If your post is rejected, you'll receive an email outlining the reason(s). We've implemented full moderation to control spam. Thank you for your patience and participation.



Expand all | Collapse all

seeking help for pps limit(per ip) under specific interface

This thread has been viewed 2 times
  • 1.  seeking help for pps limit(per ip) under specific interface

    Posted 12-16-2021 05:39
    need help about pps limit for per ip under specific interface

    device: Juniper MX204
    os version: 21.1R1.11

    ------------------------------
    UJJAL BS
    ------------------------------


  • 2.  RE: seeking help for pps limit(per ip) under specific interface

    Posted 12-16-2021 05:48
    There is a term in firewall filters for limiting by pps.

    But I've only seen it use to limit overall pps as a routing engine protection.  I don't think you can future add further per ip limits.

    https://www.juniper.net/documentation/us/en/software/junos/routing-policy/topics/ref/statement/if-exceeding-pps-edit-firewall.html

    ------------------------------
    Steve Puluka BSEET - Juniper Ambassador
    IP Architect - DQE Communications Pittsburgh, PA (Metro Ethernet & ISP)
    http://puluka.com/home
    ------------------------------