Security

 View Only

IMPORTANT MODERATION NOTICE

This community is currently under full moderation, meaning  all posts will be reviewed before appearing in the community. Please expect a brief delay—there is no need to post multiple times. If your post is rejected, you'll receive an email outlining the reason(s). We've implemented full moderation to control spam. Thank you for your patience and participation.



  • 1.  Juniper SRX RT_FLOW

    Posted 01-31-2022 05:34

    Hi all!

    Have a question about Juniper SRX security flow. One host in his zone initiates a connection, and I see a real-time security flow session. I see an active connection RT_FLOW (RT_FLOW_SESSION_CREATE_LS), but the user is not receiving ICMP replies from the end host. The solution turned out to be simple. From the side of the SRX, the user's network was not announced to the OSPF area 0.
    But it doesn't come out clearly.
    Exploring security flow SRX, or security log,  how to understand that the security session has been established and the transmission of TCP traffic is possible?
    Learn security flow traceoptions ?
    Then what indicators in it testify to this.



    ------------------------------
    BADMA BUTAEV
    ------------------------------


  • 2.  RE: Juniper SRX RT_FLOW

    Posted 01-31-2022 10:10
    Understood.
    Can be closed.

    ------------------------------
    BADMA BUTAEV
    ------------------------------