View Only


This community is currently under full moderation, meaning  all posts will be reviewed before appearing in the community. Please expect a brief delay—there is no need to post multiple times. If your post is rejected, you'll receive an email outlining the reason(s). We've implemented full moderation to control spam. Thank you for your patience and participation.

NTP boot server on MX

This thread has been viewed 3 times
  • 1.  NTP boot server on MX

    Posted 11-24-2021 14:20
    I have noticed that there no longer appears to be an option for an NTP boot server to be configured on Junos 20.4:

    root@lab# set system ntp ?
    Possible completions:
    <[Enter]> Execute this command
    + apply-groups Groups from which to inherit configuration data
    + apply-groups-except Don't inherit configuration data from these groups
    > authentication-key Authentication key information
    > broadcast Broadcast parameters
    broadcast-client Listen to broadcast NTP
    > interval-range Set the minpoll and maxpoll interval range
    > multicast-client Listen to multicast NTP
    > peer Peer parameters
    > restrict Restrict options
    > server Server parameters
    > source-address Source-Address parameters
    > threshold Set the maximum threshold(sec) allowed for NTP adjustment
    + trusted-key List of trusted authentication keys (1..65534)
    | Pipe through a command

    Does anyone know why this is and if an alternate configuration is available?