Hi,
we're trying to connect subscribers to our working juniper BNG setup via mpls pseudowires.
Everything is working fine until we had class-of-service shapers to limit customer downstream via radius.
Following error occurs:
jdhcpd: NACK received for profile request with id=0x3d57388 from bbe-smgd daemon: NACK from plugin: CoS cfg_err: 1 error_code: 1 retry FALSE result 0xfffffffd
cosd_iffm_handler_idl: Err: Cannot locate ifl (possibly unsupported): index=129 unit=-2147483646 family=28 op=add flags=0x76561193665298434x
relevant config parts:
set dynamic-profiles DYNINTF-2VLANS-DHCP-INET interfaces demux0 unit "$junos-interface-unit" proxy-arp restricted
set dynamic-profiles DYNINTF-2VLANS-DHCP-INET interfaces demux0 unit "$junos-interface-unit" vlan-tags outer "$junos-stacked-vlan-id"
set dynamic-profiles DYNINTF-2VLANS-DHCP-INET interfaces demux0 unit "$junos-interface-unit" vlan-tags inner "$junos-vlan-id"
set dynamic-profiles DYNINTF-2VLANS-DHCP-INET interfaces demux0 unit "$junos-interface-unit" family inet unnumbered-address lo0.0
set dynamic-profiles DYNINTF-2VLANS-DHCP-INET interfaces demux0 unit "$junos-interface-unit" family inet unnumbered-address preferred-source-address 10.0.0.1
set dynamic-profiles DYNINTF-2VLANS-DHCP-INET interfaces demux0 unit "$junos-interface-unit" family inet6 unnumbered-address lo0.0
set dynamic-profiles DYNINTF-2VLANS-DHCP-INET interfaces demux0 unit "$junos-interface-unit" family inet6 unnumbered-address preferred-source-address 1234::1
set dynamic-profiles DYNINTF-2VLANS-DHCP-INET protocols router-advertisement interface "$junos-interface-ifd-name" other-stateful-configuration
set dynamic-profiles DYNINTF-2VLANS-DHCP-INET protocols router-advertisement interface "$junos-interface-ifd-name" prefix 1234::/64
set dynamic-profiles DYNSUB-DHCP-VOICE-AND-INET predefined-variable-defaults cos-scheduler-shaping-rate rate 100m
set dynamic-profiles DYNSUB-DHCP-VOICE-AND-INET predefined-variable-defaults cos-shaping-rate 1000m
set dynamic-profiles DYNSUB-DHCP-VOICE-AND-INET predefined-variable-defaults cos-guaranteed-rate 980m
set dynamic-profiles DYNSUB-DHCP-VOICE-AND-INET interfaces "$junos-interface-ifd-name" unit "$junos-underlying-interface-unit" family inet filter input "$junos-input-filter"
set dynamic-profiles DYNSUB-DHCP-VOICE-AND-INET interfaces "$junos-interface-ifd-name" unit "$junos-underlying-interface-unit" family inet6 filter input "$junos-input-ipv6-filter"
set dynamic-profiles DYNSUB-DHCP-VOICE-AND-INET class-of-service traffic-control-profiles TCP_PS shaping-rate "$junos-cos-shaping-rate"
set dynamic-profiles DYNSUB-DHCP-VOICE-AND-INET class-of-service traffic-control-profiles TCP_PS guaranteed-rate "$junos-cos-guaranteed-rate"
set dynamic-profiles DYNSUB-DHCP-VOICE-AND-INET class-of-service interfaces "$junos-interface-ifd-name" unit "$junos-underlying-interface-unit" output-traffic-control-profile TCP_PS
set dynamic-profiles DYNSUB-DHCP-VOICE-AND-INET routing-options access route $junos-framed-route-ip-address-prefix next-hop "$junos-framed-route-nexthop"
Any ideas?
Junos: 19.4R3.11