Junos OS

 View Only

IMPORTANT MODERATION NOTICE

This community is currently under full moderation, meaning  all posts will be reviewed before appearing in the community. Please expect a brief delay—there is no need to post multiple times. If your post is rejected, you'll receive an email outlining the reason(s). We've implemented full moderation to control spam. Thank you for your patience and participation.



  • 1.  Clear old alarm

    Posted 01-28-2022 09:37
    I have an old chassis alarm that I can't get to go away on a pre-provisioned virtual chassis setup.  FPC 4 was removed from the chassis and powered down, but the old alarm for it is still showing.  I've gone into a shell and manually restarted the alarmd service on the master and backup but it's still showing. Chassis running 12.3. Any idea how to clear this alarm for a virtual chassis member that was removed?

    > show chassis alarms 
    1 alarms currently active
    Alarm time               Class  Description
    2022-01-11 10:45:02 MST  Major  FPC 4 PEM 0 is not supported
    
    Virtual Chassis Mode: Mixed
                                               Mstr           Mixed Neighbor List
    Member ID  Status   Serial No    Model     prio  Role      Mode ID  Interface
    1 (FPC 1)  Prsnt    111111111111 ex4200-48p   0  Linecard     Y  2  vcp-0      
                                                                     5  vcp-1      
    2 (FPC 2)  Prsnt    222222222222 ex4200-48t   0  Linecard     Y  3  vcp-0      
                                                                     1  vcp-1      
    3 (FPC 3)  Prsnt    333333333333 ex4550-32f 129  Master*      Y  2  vcp-255/2/0
                                                                     5  vcp-255/2/2
                                                                     5  vcp-255/2/3
    5 (FPC 5)  Prsnt    555555555555 ex4550-32f 129  Backup       Y  1  vcp-255/2/0
                                                                     3  vcp-255/2/2
                                                                     3  vcp-255/2/3
    


    ------------------------------
    ZANE Z
    ------------------------------


  • 2.  RE: Clear old alarm

     
    Posted 01-30-2022 15:46
    Is the pre provisioned configuration for fpc 4 also removed?

    ------------------------------
    Steve Puluka BSEET - Juniper Ambassador
    IP Architect - DQE Communications Pittsburgh, PA (Metro Ethernet & ISP)
    http://puluka.com/home
    ------------------------------