Junos OS

 View Only

IMPORTANT MODERATION NOTICE

This community is currently under full moderation, meaning  all posts will be reviewed before appearing in the community. Please expect a brief delay—there is no need to post multiple times. If your post is rejected, you'll receive an email outlining the reason(s). We've implemented full moderation to control spam. Thank you for your patience and participation.



How to monitor IPv4 and IPv6 traffic separately using snmp on dual stack device?

  • 1.  How to monitor IPv4 and IPv6 traffic separately using snmp on dual stack device?

    Posted 12-03-2021 05:36
    Hi
    Our network runs more than a hundred juniper devices and recently turned on dual stack mode, but found that IPv4 traffic could not be distinguished on the interface running the dual stack.
    I filter IPv6 traffic using (jnxIpv6IfInOctets/jnxIpv6IfInOctets) and monitor all traffic using (ifHCIn1SecRate/ifHCOut1SecRate),
    but I can't find a single oid to use to identify IPv4 traffic
    Is there an IPv4 only snmp oid or other best practices to distinguish IPv4 traffic on juniper devices?



    ------------------------------
    Gary_1984
    ------------------------------