Hi all,
I'm implementing real-time performance monitoring with TWAMP through two devices Juniper.
My Diagram and configuration like below.
My problem is about running measurement all time (my probe-count configuration is 55 times after that measurement will be closed, and probe-count support range from 1 to 255)
My config:
#CLIENT-SENDER-TEST> show configuration services rpm twamp
client {
control-connection c1 {
destination-interface si-1/1/0.10;
history-size 500;
target-address 70.70.70.1;
test-count 1;
test-interval 1;
traps {
test-iteration-done;
control-connection-closed;
}
test-session t1 {
target-address 70.70.70.1;
data-fill-with-zeros;
data-size 1400;
probe-count 55; ###my problem###
probe-interval 1;
}
}
}
#CLIENT-REFLECTOR-TEST> show configuration services rpm twamp
server {
authentication-mode none;
port 862;
client-list Client1 {
address {
60.60.60.1/32;
10.20.27.10/32;
}
}
}