This message was posted by a user wishing to remain anonymous
I have the following scenario and I need to transport vlans 10 (trunk) and 20 (access) from Switch 1 to Switch 2.
But I only can use 9090 vlan for link switch 1 and switch 2. I thought if something like qinq would be possible. How to configure?
SWITCH 1
set interfaces xe-0/0/0 description LINK-TO-SW2
set interfaces xe-0/0/0 mtu 9216
set interfaces xe-0/0/0 unit 0 family ethernet-switching interface-mode trunk
set interfaces xe-0/0/0 unit 0 family ethernet-switching vlan members v9090-THS-MANAGE
set vlans v9090-THS-MANAGE l3-interface irb.9090
set vlans v9090-THS-MANAGE vlan-id 9090
set interfaces irb unit 9090 family inet address 192.168.0.1/30
set interfaces xe-0/0/1 description C1
set interfaces xe-0/0/1 unit 0 family ethernet-switching interface-mode trunk
set interfaces xe-0/0/1 unit 0 family ethernet-switching vlan members V10-C1
set vlans V10-C1 vlan-id 10
set interfaces xe-0/0/2 description C2
set interfaces xe-0/0/2 unit 0 family ethernet-switching interface-mode access
set interfaces xe-0/0/2 unit 0 family ethernet-switching vlan members V20-C2
set vlans V20-C2 vlan-id 20
SWITCH 2
set interfaces xe-0/0/0 description LINK-TO-SW1
set interfaces xe-0/0/0 mtu 9216
set interfaces xe-0/0/0 unit 0 family ethernet-switching interface-mode trunk
set interfaces xe-0/0/0 unit 0 family ethernet-switching vlan members v9090-THS-MANAGE
set vlans v9090-THS-MANAGE l3-interface irb.9090
set vlans v9090-THS-MANAGE vlan-id 9090
set interfaces irb unit 9090 family inet address 192.168.0.2/30
set interfaces xe-0/0/1 description C1
set interfaces xe-0/0/1 unit 0 family ethernet-switching interface-mode trunk
set interfaces xe-0/0/1 unit 0 family ethernet-switching vlan members V10-C1
set vlans V10-C1 vlan-id 10
set interfaces xe-0/0/2 description C2
set interfaces xe-0/0/2 unit 0 family ethernet-switching interface-mode access
set interfaces xe-0/0/2 unit 0 family ethernet-switching vlan members V20-C2
set vlans V20-C2 vlan-id 20