Junos OS

 View Only

IMPORTANT MODERATION NOTICE

This community is currently under full moderation, meaning  all posts will be reviewed before appearing in the community. Please expect a brief delay—there is no need to post multiple times. If your post is rejected, you'll receive an email outlining the reason(s). We've implemented full moderation to control spam. Thank you for your patience and participation.



  • 1.  Packet Capture for PTX 10001-36MR

    Posted 11-09-2021 11:51
    Hello Everyone,

    Can we packet capture on the PTX10001 Router? I am not finding a way to configure the packet capture options in the edit forwarding options hierarchy. I have a PTX 10001-36MR running 20.4R3-EVO code. Any suggestions or pointers are appreciated.

    Thank you

    ------------------------------
    SANEEV PRASAD DASARI
    ------------------------------


  • 2.  RE: Packet Capture for PTX 10001-36MR

     
    Posted 11-10-2021 05:28
    I believe these are the instructions for EVO packet capture.

    https://www.juniper.net/documentation/us/en/software/junos/network-mgmt/topics/topic-map/analyze-network-traffic-by-using-packet-capture.html

    ------------------------------
    Steve Puluka BSEET - Juniper Ambassador
    IP Architect - DQE Communications Pittsburgh, PA (Metro Ethernet & ISP)
    http://puluka.com/home
    ------------------------------



  • 3.  RE: Packet Capture for PTX 10001-36MR

    Posted 11-10-2021 13:56
    Correct! I was going thru the same document but on the current version that I am running, the Junos 20.4R3-EVO code, I am not seeing an option to set packet capture settings, for ex:

    [edit]
    user@host# 
    edit forwarding-options
    user@host# 
    set packet-capture maximum-capture-size 500


    I do not have any option called "set packet-capture <>"

    ------------------------------
    SANEEV PRASAD DASARI
    ------------------------------



  • 4.  RE: Packet Capture for PTX 10001-36MR

     
    Posted 11-10-2021 16:38
    Looking at your platform and version in the feature explorer, it appears that  port forwarding under forwarding options would be the only viable feature for this.  I don't see packet-capture implemented yet on this platform.

    https://apps.juniper.net/feature-explorer/select-platform.html?category=Routing&typ=1#family=&hc=&pid=51600036&platform=PTX10001-36MR&rel=20.4R3&sid=1184&stat=0.4544587850938089&swName=Junos%20OS%20Evolved&swtab=Junos%20OS%20Evolved

    ------------------------------
    Steve Puluka BSEET - Juniper Ambassador
    IP Architect - DQE Communications Pittsburgh, PA (Metro Ethernet & ISP)
    http://puluka.com/home
    ------------------------------



  • 5.  RE: Packet Capture for PTX 10001-36MR

    Posted 11-10-2021 19:02
    Got it! Yeah did just that but really wanted to know if it supported the packet capture feature. However, I could use monitor traffic feature from the CLI which worked too.

    ------------------------------
    SANEEV PRASAD DASARI
    ------------------------------