Junos OS

 View Only


This community is currently under full moderation, meaning  all posts will be reviewed before appearing in the community. Please expect a brief delay—there is no need to post multiple times. If your post is rejected, you'll receive an email outlining the reason(s). We've implemented full moderation to control spam. Thank you for your patience and participation.

  • 1.  MX LACP configuration

    Posted 11-15-2021 14:13
    Hi, I was researching about various features of MX series and its MPCs. I have a question about LACP on MX960
    Can we create a  LACP bundle on from ports on different MPC? Or all of bundle members must be on the same MPC?
    Besides this is there any restrictions in this Regard?
    Thank you..

    Ali Soltan

  • 2.  RE: MX LACP configuration
    Best Answer

    Posted 11-23-2021 05:35
    You can have ae member interfaces on mulitple mpc cards and this is the common approach as it gives some hardware redundancy should a card fail for the bundle.

    The primary "restriction" is the recommendation that all member links be the same speed and you don't mix ports of different speed in the same bundle.

    Steve Puluka BSEET - Juniper Ambassador
    IP Architect - DQE Communications Pittsburgh, PA (Metro Ethernet & ISP)

  • 3.  RE: MX LACP configuration

    Posted 11-17-2021 05:34
    Thank you for your answer..

    Ali Soltan