Junos OS

 View Only

IMPORTANT MODERATION NOTICE

This community is currently under full moderation, meaning  all posts will be reviewed before appearing in the community. Please expect a brief delay—there is no need to post multiple times. If your post is rejected, you'll receive an email outlining the reason(s). We've implemented full moderation to control spam. Thank you for your patience and participation.



POE power limit do not apply

This thread has been viewed 4 times
  • 1.  POE power limit do not apply

    Posted 05-10-2022 06:03
    hi

    I've configured POE power limit on my EX2300 switch, but it doesn't seem to be applied.
    my Junos version is 19.4R3.11.
    ive  executed the command "set poe interface all maximum-power 15.4"
    but it doesn't seem to affect the power allocation on the switch, see "show poe int" output below.

    any idea what im missing here?
    appreciate any tips or comments.

    thanks


    root@JYou# run show poe interface
    Interface Admin Oper Pair/Mode Max Priority Power Class
    status status status power consumption
    ge-0/0/0 Enabled OFF 2P/AT 15.4W Low 0.0W not-applicable
    ge-0/0/1 Enabled ON 2P/AT 30.0W Low 3.0W 4
    ge-0/0/2 Enabled ON 2P/AT 30.0W Low 3.0W 4
    ge-0/0/3 Enabled OFF 2P/AT 15.4W Low 0.0W not-applicable
    ge-0/0/4 Enabled OFF 2P/AT 15.4W Low 0.0W not-applicable
    ge-0/0/5 Enabled OFF 2P/AT 15.4W Low 0.0W not-applicable
    ge-0/0/6 Enabled OFF 2P/AT 15.4W Low 0.0W not-applicable
    ge-0/0/7 Enabled OFF 2P/AT 15.4W Low 0.0W not-applicable


    ------------------------------
    AHIYA ZADOK
    ------------------------------