hi All
new with Junos
I'm trying to figure out the best way to configure a large number of VLANs (200-1000) on all of my ports as Tagged and different untagged VLANs on some of the ports.
I'm trying to avoid a large number of config lines to execute' but on the other hand, I do need the flexibility to easily change VLANsinterface membership configuration in the future.
i know the options are :
1) VLAN-range command, which isn't available in my switch (ill try to upgrade to more recent firmware)
2) vlan-id-list option - will i have the flexibility i need with it?
3)Wildcard range set option, which sounds like the right solution but because i need to parameters {vlan name} and {vlan-id} in the same command, it didn't really work.
it created vlan names according to the range i entered but assigned the same vlan-id to all of the vlans. (attached the syntax and output below)
im using ex2300 with firmware 18.2R3-S4.1
ill appreciate any recommendations and tips,
thanks
wildcard example:
root@JYou# wildcard range set vlans cust[10-20] vlan-id [10-20]
/
{master:0}[edit]
root@JYou# show vlans
cust {
vlan-id-list 10-20;
}
cust10 {
vlan-id 20;
}
cust11 {
vlan-id 20;
}
cust12 {
vlan-id 20;
}
cust13 {
vlan-id 20;
}
cust14 {
vlan-id 20;
}
cust15 {
vlan-id 20;
}
cust16 {
vlan-id 20;
------------------------------
AHIYA ZADOK
------------------------------