Junos OS

 View Only

IMPORTANT MODERATION NOTICE

This community is currently under full moderation, meaning  all posts will be reviewed before appearing in the community. Please expect a brief delay—there is no need to post multiple times. If your post is rejected, you'll receive an email outlining the reason(s). We've implemented full moderation to control spam. Thank you for your patience and participation.



Juniper vMX

This thread has been viewed 7 times
  • 1.  Juniper vMX

    Posted 04-28-2022 16:47
    Hi Guys,
    I'm trying to play a bit with juniper vMX and I want to implement PAT but I don't know how to do it.
    I've set up a basic topology in gns3 with a vMX and two cisco routers configure the following ip on cisco R1 95.77.183.1/27 as an ISP router and R1 from cisco with 10.0.77.253/24.
    vMX has to act as a nat gateway and translate 10.0.77.253 into 95.77.183.30 but I couldn't find a documentation to help me do nat on this vmx .
    Can you help me please ?

    ------------------------------
    ALEXANDRU VASI
    ------------------------------