Hi
I am testing some complex scenarios and I need to filter OSPF advertised
route (Not LSA obviously )based on
Route-Source IP address. In IOS there is a command for filtering based route source. The configuration example can be something like this:
ip access-list standard OSPF-ROUTE-SOURCE
permit 10.234.247.5
!
route-map OSPF1-FILTER deny 10
match ip route-source OSPF-ROUTE-SOURCE
route-map OSPF1-FILTER permit 1000
!
router ospf 1
router-id 10.234.248.2
redistribute connected subnets route-map Connected->OSPF1
redistribute ospf 2 subnets route-map OSPF2->OSPF1
network 10.10.23.2 0.0.0.0 area 0
network 10.10.24.2 0.0.0.0 area 0
network 10.10.52.2 0.0.0.0 area 0
default-information originate metric-type 1
distribute-list route-map OSPF1-FILTER in
mpls ldp autoconfig
I wonder is there any configuration method in JunOS for this purpose or not?
For the record, I am using Junos: 18.1R1.9 on vMX
Thank you for your help and support
------------------------------
Ali Soltan
------------------------------