When checking SNMP traffic, there are two traffics on one interface.
----------------------------
ex)
interfaces input
ge-0/2/0 120900
ge-0/2/0.0 3214900
----------------------------
When the NMS checks for traffic, there is more traffic on the ge-0/2/0.0 interface than on the ge-0/2/0
The corresponding interface is the l3 interface.
set interfaces ge-0/2/0 unit 0 family inet address x.x.x.x/24.
########################################################
However, other interfaces have more physical interface traffic. These interfaces are vlan interfaces.
set interfaces ge-0/0/28 unit 0 family ethernet-switching storm-control default
set interfaces ge-0/0/29 unit 0 family ethernet-switching storm-control default
set interfaces ge-0/0/30 unit 0 family ethernet-switching storm-control default
set interfaces ge-0/0/31 unit 0 family ethernet-switching storm-control default
set interfaces ge-0/0/32 unit 0 family ethernet-switching storm-control default
set interfaces ge-0/0/33 unit 0 family ethernet-switching storm-control default
set interfaces ge-0/0/34 unit 0 family ethernet-switching storm-control default
set interfaces ge-0/0/35 unit 0 family ethernet-switching storm-control default
set interfaces ge-0/0/36 unit 0 family ethernet-switching storm-control default
----------------------------
ex)
interfaces input
ge-0/0/36 7789766
ge-0/0/36.0 454677
----------------------------
What is the difference? Which interface is right ?
------------------------------
Kwon Taek Hoo
------------------------------