Junos OS

 View Only

IMPORTANT MODERATION NOTICE

This community is currently under full moderation, meaning  all posts will be reviewed before appearing in the community. Please expect a brief delay—there is no need to post multiple times. If your post is rejected, you'll receive an email outlining the reason(s). We've implemented full moderation to control spam. Thank you for your patience and participation.



  • 1.  BNG + NAT on vMX

    Posted 09-16-2020 01:06
      |   view attached

    Hi

    I am trying to NAT ip address of PPPoE subscriber to Internet facing of vMX Ip address, I found these links but I cannot Correlate the configuration:

    https://forums.juniper.net/t5/vMX/NAT-support-on-vMX/td-p/282565

    https://kb.juniper.net/InfoCenter/index?page=content&id=KB9337

    Would you please guide about this case?

    I attached the diagram of the LAB



  • 2.  RE: BNG + NAT on vMX
    Best Answer

    Posted 09-16-2020 01:50

    Hi,

     

    vMX does not support inline NAT. There were initial releases with a seperate vMS-MPC VM to handle this, but the performance never manage to be good enough and the feature were EOL.

     

    If you need do to NAT with BNG, you will need a physical MX with a MS-MPC/MS-MIC or handle NAT via an external device eg. a vSRX / SRX.



  • 3.  RE: BNG + NAT on vMX

    Posted 09-16-2020 02:06

    Thank you dear Jonas for saving time...



  • 4.  RE: BNG + NAT on vMX

    Posted 05-03-2022 15:53
    You mentioned some initial releases of vMX had vMS-MPC functionality.  This would be interesting to test with.  How could I get the vMS-MPC working in my vMX lab?

    ------------------------------
    Aaron Gould
    Senior Network Engineer
    aaron@gvtc.com
    https://www.linkedin.com/in/agould123/
    ------------------------------