HI
Some more questions about GRE on MPC10E:
1-Can unit interfaces on one GRE be configured with different sources and destinations ip addresses?
2- Is MPLS supported on GRE tunnel?
3- Considering these notes
- This card has 10x100GE ports and works in Line-Rate mode if we use enhanced Midplane. This means 1Tbps throughput.
- This card has two PFE with 500Gbps.
Now considering above notes:
1- Using two GRE tunnel means we cannot use two 100GE port?
2- If I configured a tunnel with Source interface on Ports of this Card, what will be the effect on Line Card performance? A port will not be useable at line rate speed. right?
3- Can we scale up the capacity of GRE tunnel to 500Gbps?
Thank you
Alireza