Routing

 View Only

IMPORTANT MODERATION NOTICE

This community is currently under full moderation, meaning  all posts will be reviewed before appearing in the community. Please expect a brief delay—there is no need to post multiple times. If your post is rejected, you'll receive an email outlining the reason(s). We've implemented full moderation to control spam. Thank you for your patience and participation.



  • 1.  MULTIPLE RADIUS ROLLOVER ON REJECT - MX80

    Posted 05-16-2022 19:51
    Hi dears, I'm migrating from one RADIUS to another and working with them simultaneously, but i need a way to rollout rejected authentication packets . As their databases are not equal, sometimes a user tries to authenticate and gets rejected.

    Is there a way to configure authentication based on response from all RADIUS and not only by one? I need my router to query on all RADIUS servers before rejecting a user.

    I'm using a MX80 router with version 18.04

    Regards

    ------------------------------
    Wallace Andrade
    ------------------------------


  • 2.  RE: MULTIPLE RADIUS ROLLOVER ON REJECT - MX80

     
    Posted 05-21-2022 11:35
    Unfortunately the RADIUS list is rolled through only if there is no response then moving on to the next one. 

    If there is a response at all then that is the final answer accept or reject.

    ------------------------------
    Steve Puluka BSEET - Juniper Ambassador
    IP Architect - DQE Communications Pittsburgh, PA (Metro Ethernet & ISP)
    http://puluka.com/home
    ------------------------------



  • 3.  RE: MULTIPLE RADIUS ROLLOVER ON REJECT - MX80

    Posted 05-23-2022 10:22
    Hi, Steve!

    That's OK. Thanks for your help!
    Regards

    ------------------------------
    Wallace Andrade
    ------------------------------