Routing

 View Only

IMPORTANT MODERATION NOTICE

This community is currently under full moderation, meaning  all posts will be reviewed before appearing in the community. Please expect a brief delay—there is no need to post multiple times. If your post is rejected, you'll receive an email outlining the reason(s). We've implemented full moderation to control spam. Thank you for your patience and participation.



Flow Monitoring with cflowd v5

  • 1.  Flow Monitoring with cflowd v5

    Posted 04-26-2022 05:28
    Hello!

    I need to configure cflowd version 5 monitoring on MX480 routers and send flow data to an external collector. The router has MPC7e line cards and two REs (model RE-S-2X00x6) but we don't have any service cards. I took a look at documentation but found lots of confusing info as there are inline/active/passive methods each with different limitations and requirements. so I didn't manage to decide on what method should I use on the device. 
    As far as I know the in passive mode the port/card cannot participate in routing, so this option can be ignored cause we need routing and monitoring at the same time. 
    I would appreciate any suggestion on this.

    regards.

    ------------------------------
    TAYMAZ MOHSENZADEH
    ------------------------------