Routing

 View Only

IMPORTANT MODERATION NOTICE

This community is currently under full moderation, meaning  all posts will be reviewed before appearing in the community. Please expect a brief delay—there is no need to post multiple times. If your post is rejected, you'll receive an email outlining the reason(s). We've implemented full moderation to control spam. Thank you for your patience and participation.



  • 1.  Question for RSVP with cspf and no-cspf

    Posted 03-25-2022 09:32
    In my understanding, when traffic engineering extensions are enabled, I do not have to use no-cspf.
    The Junos implementation is IS-IS enables traffic engineering by default. If I use IS-IS as IGP, I do not have to use no-cspf.  Is that right ?

    But when I did a lab with RSVP with four routers, 3 are PEs and 1 is P.  I enabled RSVP and  specified the LSP, but no RSVP session was up until I used no-cspf.

    What did I miss here?

    thanks in advance !!


  • 2.  RE: Question for RSVP with cspf and no-cspf
    Best Answer

     
    Posted 03-25-2022 17:35
    Hi.

    Traffic engineering extensions does not enable CSPF. They are two different things.

    Traffic engineering extensions allow interfaces to include their RSVP parameters (BW, admin groups, SRLG, TE-metric) in their flooded IGP messages.
    That would be pointless unless you configure your RSVP LSP's ingress to run CSPF, which computes an LSP path taking into consideration the RSVP parameters of all the network interfaces.

    --Deepak


  • 3.  RE: Question for RSVP with cspf and no-cspf

    Posted 03-25-2022 19:34
    thanks so much !!