Routing

 View Only

IMPORTANT MODERATION NOTICE

This community is currently under full moderation, meaning  all posts will be reviewed before appearing in the community. Please expect a brief delay—there is no need to post multiple times. If your post is rejected, you'll receive an email outlining the reason(s). We've implemented full moderation to control spam. Thank you for your patience and participation.



  • 1.  MX10003 ER 40Km Support with SFPP-10G-ER-C Transceiver

    Posted 04-27-2022 05:23
    Hi There,
    We would like to use ER optics natively on our MX10003,
    According to this page MX10003 Hardware Compatibility | Juniper Networks Pathfinder 
    ... this part SFPP-10G-ER-C (Part Number: 740-031983) SFPP-10G-ER-C | Juniper Networks Pathfinder Hardware Compatibility Tool
    ... can be used without  the Caveat "Use the QSA adapter to convert a 40-Gbps port to a 10-Gbps or a 1-Gbps port"

    Has anybody had experience with this transceiver and confirm this is indeed the case and not a documentation error or mis-print?
    Can it be used on the MX10003 without the MAM1Q00A-QSA adapter?

    Regards,



    ------------------------------
    ROWAN SAKUL
    ------------------------------


  • 2.  RE: MX10003 ER 40Km Support with SFPP-10G-ER-C Transceiver

    Posted 04-28-2022 10:11
    Hi Rowan,
    Yes, you really need QSA because of the interface form factor.
    MX10K3 uses QSFP transceiver form factor for 40G and 100G, and you want to use a SFPP transceiver for the 10G ER.


    ------------------------------
    Eduardo Haro
    ------------------------------