Routing

 View Only

IMPORTANT MODERATION NOTICE

This community is currently under full moderation, meaning  all posts will be reviewed before appearing in the community. Please expect a brief delay—there is no need to post multiple times. If your post is rejected, you'll receive an email outlining the reason(s). We've implemented full moderation to control spam. Thank you for your patience and participation.



  • 1.  Allowing specific igmp queries from a downstream customer

    Posted 01-14-2022 16:40
    We are looking for a way to limit the multicast streams a customer can tune into. I know we can use a firewall filter to accomplish this, but was wondering if there was an alternate way to accomplish this.

    Any help on this would be greatly appreciated.

    ------------------------------
    COREY COLLINS
    ------------------------------


  • 2.  RE: Allowing specific igmp queries from a downstream customer

    Posted 03-16-2022 19:16
    hi, yes you could use "set protocols igmp interface ge-0/0/0 group-limit" command

    Luis Flor

    ------------------------------
    LUIS W FLOR GONZA
    ------------------------------