The issue I am having is the CE device will stop communicating within the VLAN unless the cable is replugged.
I can do this elevated by manually bringing the port down and up or physically handling the cable. But this is not desired.
The network has 13 SRX-550 routers located within a 15 x 15 mile area. Each router is connected to 2 adjacent routers.
Sometimes, the devices connected to a router (CE) will stop communicating all together and a port toggle (PE) resolves this issue.
Am I missing something here? The network has been plagued with this issue for quite some time. But we have simply gone out to reset the devices. Sometimes, when time is not something I have. A simply "Request System Reboot" solves the problem. But this should not be happening.