Switching

 View Only

IMPORTANT MODERATION NOTICE

This community is currently under full moderation, meaning  all posts will be reviewed before appearing in the community. Please expect a brief delay—there is no need to post multiple times. If your post is rejected, you'll receive an email outlining the reason(s). We've implemented full moderation to control spam. Thank you for your patience and participation.



Configuration Best Practices

  • 1.  Configuration Best Practices

    Posted 12-01-2021 05:44
      |   view attached
    Hi Guys,

    I am currently setting up internet connectivity for a client. Have a  SRX320 in a HA pair (Active/Standby) which connects to a standalone EX2300. Internet provider will be supplying dual-home connections to EX2300 and provide /30 ip addresses for configuration.  What would be the best practice to configure this setup in terms of link/node redundancy?? Your advise is highly appreciated. Please see attached topology for reference.

    ------------------------------
    RUTVIJ BRAHMBHATT
    ------------------------------

    Attachment(s)

    vsdx
    Juniper Setup.vsdx   80 KB 1 version