Hi,
I'm using EX2300s with 802.1x configured and all works well, but I get an excessive amount of logs referencing DOT1Q, thousands every day, see below...
dc-pfe: LBCM-L2,brcm_rtag7_config_hash_seeds(),1598:bcm_switch_control_set, bcmSwitchHashSeed0 failed(ACL Unresolve DOT1Q failed:-16) on unit:0
dc-pfe: LBCM-L2,brcm_rtag7_config_hash_seeds(),1606:bcm_switch_control_set, bcmSwitchHashSeed1 failed(ACL Unresolve DOT1Q failed:-16) on unit:0
dc-pfe: LBCM-L2,brcm_rtag7_config_hash_seeds(),1598:bcm_switch_control_set, bcmSwitchHashSeed0 failed(ACL Unresolve DOT1Q failed:-16) on unit:0
dc-pfe: LBCM-L2,brcm_rtag7_config_hash_seeds(),1606:bcm_switch_control_set, bcmSwitchHashSeed1 failed(ACL Unresolve DOT1Q failed:-16) on unit:0
fpc0 LBCM-L2,brcm_rtag7_config_hash_seeds(),1598:bcm_switch_control_set, bcmSwitchHashSeed0 failed(ACL Unresolve DOT1Q failed:-16) on unit:0
fpc0 LBCM-L2,brcm_rtag7_config_hash_seeds(),1606:bcm_switch_control_set, bcmSwitchHashSeed1 failed(ACL Unresolve DOT1Q failed:-16) on unit:0
fpc0 LBCM-L2,brcm_rtag7_config_hash_seeds(),1598:bcm_switch_control_set, bcmSwitchHashSeed0 failed(ACL Unresolve DOT1Q failed:-16) on unit:0
fpc0 LBCM-L2,brcm_rtag7_config_hash_seeds(),1606:bcm_switch_control_set, bcmSwitchHashSeed1 failed(ACL Unresolve DOT1Q failed:-16) on unit:0
If I disable 802.1x then I do not see these logs when a client connects, so I'm wondering if these are generated before 802.1x is successful before a Vlan tag can be assigned or something, but I may be way off. I also thought maybe the RADIUS server was sending an ACL that was unwanted but I think I've ruled that out.
I can't seem to find an answer trawling the internet, can anyone shed any light on it. Is this expected behaviour? As I mentioned, everything functions as required but these logs are excessive and I currently filter them, but if I can tweak the config in some way to stop these I would prefer to.
Many thanks.
------------------------------
------------------------------