Switching

 View Only

IMPORTANT MODERATION NOTICE

This community is currently under full moderation, meaning  all posts will be reviewed before appearing in the community. Please expect a brief delay—there is no need to post multiple times. If your post is rejected, you'll receive an email outlining the reason(s). We've implemented full moderation to control spam. Thank you for your patience and participation.



  • 1.  Can we channelize the 40G ports   into 4x10 on EX4300?

    Posted 10 days ago
    Hi, Guys

    I have problem to channelize the 40G ports into 4x10 on EX4300? I did the configure but it was not working. Does anyone know if there is workaround?

    Thank you.



  • 2.  RE: Can we channelize the 40G ports   into 4x10 on EX4300?

    Posted 10 days ago
    Hi Eric, 

    Can you share your configuration and  JunOS software release. 
    It works fine for me. 

    regards, 
    Théo

    ------------------------------
    THEO QUENNEHEN
    ------------------------------



  • 3.  RE: Can we channelize the 40G ports   into 4x10 on EX4300?

    Posted 9 days ago
    Hi, Theo

    Are you using EX4300-T version? I do not have problem on EX4600.


  • 4.  RE: Can we channelize the 40G ports   into 4x10 on EX4300?

     
    Posted 10 days ago
    You cannot channelize the built-in 40Gb ports. You might be able to channelize the ports on the optional EX-UM-2QSFP module.