Switching

 View Only

IMPORTANT MODERATION NOTICE

This community is currently under full moderation, meaning  all posts will be reviewed before appearing in the community. Please expect a brief delay—there is no need to post multiple times. If your post is rejected, you'll receive an email outlining the reason(s). We've implemented full moderation to control spam. Thank you for your patience and participation.



  • 1.  JWEB service not working in 20.4

    Posted 26 days ago
    Hi All,

    After upgrading OS from 18 to 20.4 JWEB and Web management service is not working.

    Can someone help to troubleshoot the issue or help me with the correct step if I am following different step.

    ------------------------------
    HARINARAYAN TRIPATHI
    ------------------------------




  • 2.  RE: JWEB service not working in 20.4

     
    Posted 26 days ago
    What platform are you on for this? 

    Some of the models like ex2300 have a separate installer for Junos and jweb.  So in addition to the junos upgrade you would also need to download and apply the updated version os jweb.

    What are the specific errors you are seeing?
    What is the configuration under system for the web services?

    ------------------------------
    Steve Puluka BSEET - Juniper Ambassador
    IP Architect - DQE Communications Pittsburgh, PA (Metro Ethernet & ISP)
    http://puluka.com/home
    ------------------------------



  • 3.  RE: JWEB service not working in 20.4

    Posted 26 days ago
    Hi spuluka,

    I already install Jweb using USB boot option. still unable to access web management.

    Could we connect to review all alignments are in place or something I am missing.

    ------------------------------
    HARINARAYAN TRIPATHI
    ------------------------------



  • 4.  RE: JWEB service not working in 20.4

    Posted 26 days ago
    I install both the file using USB booting option but could not resolve the issue

    ------------------------------
    HARINARAYAN TRIPATHI
    ------------------------------



  • 5.  RE: JWEB service not working in 20.4

     
    Posted 25 days ago
    In addition to the install you need to confirm that web is enable under system in the configuration

    This should show web-management and a certificate for using https

    show configuration system services web-management 

    https {

        system-generated-certificate;

    }

    If interfaces are listed these will be the only places you can initiate the connection to as well.

    ------------------------------
    Steve Puluka BSEET - Juniper Ambassador
    IP Architect - DQE Communications Pittsburgh, PA (Metro Ethernet & ISP)
    http://puluka.com/home
    ------------------------------



  • 6.  RE: JWEB service not working in 20.4

    Posted 24 days ago
      |   view attached
    Hi spuluka,

    Please find attached information for the current configuration. let me know if you are looking for anything else.

    Is there any possible way to connect and review all configurations and try to fix it?

    ------------------------------
    HARINARAYAN TRIPATHI
    ------------------------------

    Attachment(s)

    docx
    Current Config.docx   61 KB 1 version


  • 7.  RE: JWEB service not working in 20.4

     
    Posted 24 days ago
    Looks like you have the old style interface declaration under system services. 

    In system services you have vlan.10 as the interface.  Remove this one.

    But this is a new style srx and the actual interface is irb.10.  So add this one.

    ------------------------------
    Steve Puluka BSEET - Juniper Ambassador
    IP Architect - DQE Communications Pittsburgh, PA (Metro Ethernet & ISP)
    http://puluka.com/home
    ------------------------------



  • 8.  RE: JWEB service not working in 20.4

    Posted 23 days ago
    Thanks spuluka,

    Issue resolve. Now I am able to connect the same.

    ------------------------------
    HARINARAYAN TRIPATHI
    ------------------------------