Switching

 View Only

IMPORTANT MODERATION NOTICE

This community is currently under full moderation, meaning  all posts will be reviewed before appearing in the community. Please expect a brief delay—there is no need to post multiple times. If your post is rejected, you'll receive an email outlining the reason(s). We've implemented full moderation to control spam. Thank you for your patience and participation.



Change In Band management port for connection to Mist for EX Switch

  • 1.  Change In Band management port for connection to Mist for EX Switch

    Posted 04-14-2022 17:06
    Hey, so this is probably an easy fix I'm completely blanking on, so I have an EX3400 switch and we are using Mist since we already had Mist for our Wifi. When I do the initial setup, the in band management port is 0/0/0, but I need to change it to one of the SFP ports (0/2/0) because a single fiber connection is the only uplink the the area we are putting the switch. 

    Is there a quick command to change the port and move the management/switch IP to that port?

    ------------------------------
    MITCHELL HOLT
    ------------------------------