Switching

 View Only

IMPORTANT MODERATION NOTICE

This community is currently under full moderation, meaning  all posts will be reviewed before appearing in the community. Please expect a brief delay—there is no need to post multiple times. If your post is rejected, you'll receive an email outlining the reason(s). We've implemented full moderation to control spam. Thank you for your patience and participation.



  • 1.  Can we channelize the 40G ports   into 4x10 on EX4300?

    Posted 12 days ago
    Hi, Guys

    Can I channelize the 40G ports on EX4300  into 4x10. I did the configure but it was not working. Is there any solution?

    Thank you.



  • 2.  RE: Can we channelize the 40G ports   into 4x10 on EX4300?

     
    Posted 11 days ago
    What is your model and junos version?  According to the feature explorer this is supported with EX4300 Multigigabit in Junos OS 18.4R1
    there are two versions of the ex4300 only the larger capacity Multigigabit supports this feature.


    https://apps.juniper.net/feature-explorer/feature-info.html?fKey=6132&fn=Channelizing%2040-Gigabit%20Ethernet%20QSFP+%20interfaces

    ------------------------------
    Steve Puluka BSEET - Juniper Ambassador
    IP Architect - DQE Communications Pittsburgh, PA (Metro Ethernet & ISP)
    http://puluka.com/home
    ------------------------------



  • 3.  RE: Can we channelize the 40G ports   into 4x10 on EX4300?

    Posted 10 days ago
    Thanks, Steve

    My EX4300 is  ex4300-48t with very old firmware. I Google it a lot that it seems that version does not support 40G channelize. But I do not have problem on 40G to 40G connection on EX4300.