Switching

 View Only

IMPORTANT MODERATION NOTICE

This community is currently under full moderation, meaning  all posts will be reviewed before appearing in the community. Please expect a brief delay—there is no need to post multiple times. If your post is rejected, you'll receive an email outlining the reason(s). We've implemented full moderation to control spam. Thank you for your patience and participation.



  • 1.  EX2300 Uplink ports

    This message was posted by a user wishing to remain anonymous
    Posted 01-17-2022 07:14
    This message was posted by a user wishing to remain anonymous

    Hello,

    I am looking to configure some EX2300 switching using VC and was wondering if the 10gb uplink ports can be used in a mixed fashion with some configured for VC and others as normal ports?

    Regards,
    Chris


  • 2.  RE: EX2300 Uplink ports

    Posted 01-17-2022 10:53

    Hi Chris,

    yes you can use some ports voor VC and others as uplink. Commonly two as VC and two as uplink. You have to  use this command to make a port a VC port: request virtual-chassis vc-port | Juniper Networks . Please remember two thing about EX2300's and VC ports: 
    - A maximum of four members is supported
    -A license is required




    ------------------------------
    Michel Tepper
    Solutions Architect
    Nuvias

    Amsterdam Area.
    ------------------------------