I am using a simple Q-in-Q configuration on EX-2300-C switches. All client trafic is connected to port ge-0/0/0 , vlans 1 to 4094 get tagged/untagged with QinQ vlan 3918, and interface ge-0/0/11 is connected to the service side. The only vlan travelling from one switch port 11 to another switch port 11 is 3918.
my problem is that when I do a show ethernet-switching table, what is displayed is the 3918 vlan only. How can I have the switch display the vlans being double tagged by the 3918 vlan-id ?
Thanks,
Michel
# show interfaces ge-0/0/0
description ReseauBiblio-3918-QinQ_ACTIF;
link-mode full-duplex;
encapsulation extended-vlan-bridge;
unit 3918 {
vlan-id-list 1-4094;
input-vlan-map push;
output-vlan-map pop;
family ethernet-switching {
storm-control default;
}
}
===========================================
# show interfaces ge-0/0/11
vlan-tagging;
mtu 1538;
unit 3918 {
vlan-id 3918;
family ethernet-switching;
}
============================================
# show vlans
QinQ-3918 {
interface ge-0/0/11.3918;
interface ge-0/0/0.3918;
}
------------------------------
Michel Lapointe
------------------------------