Switching

 View Only

IMPORTANT MODERATION NOTICE

This community is currently under full moderation, meaning  all posts will be reviewed before appearing in the community. Please expect a brief delay—there is no need to post multiple times. If your post is rejected, you'll receive an email outlining the reason(s). We've implemented full moderation to control spam. Thank you for your patience and participation.



QFX5120-48Y not recognising 10GE-T SFP

  • 1.  QFX5120-48Y not recognising 10GE-T SFP

    Posted 04-07-2022 10:13

    A colleague has an issue with a 5120 and 10GE-T SFP's.

    When 10G-SR optics are in sfp-0/0/6 the port is up and SFP shows in 'show chassis hardware'

    When 10G-T SFP inserted the following logs are generated:

    Apr 7 18:35:40 SW-01 fpc0 FAILED(-1) read of SFP eeprom for port: 6
    Apr 7 18:35:40 SW-01 fpc0 sfp-0/0/6(6), SFP 6: in sfp_read_range, failed to read SFP EEPROM address 0
    Apr 7 18:35:41 SW-01 fpc0 Unknown transceiver type. Set to default OC3C
    Apr 7 18:35:41 SW-01 fpc0 sfp-0/0/6(6), SFP 6: unknown OC3 optic type 0 

    And SFP details are not shown under show chassis hardware.

    JUNOS Version 20.2R3.9 Flex.

    Juniper branded SR and 10G-T SFPS

    QFX-SFP-10GE-SR Part Number: 740-021308

    JNP-SFPP-10GE-T Part Number: 740-083295

    Many thanks



    ------------------------------
    JAMES
    ------------------------------