I am trying to practice spanning tree with a few vQFXs. Anyone knows any limitations for this ?
thanks !!
root@EX1# show protocols mstp | display set
set protocols mstp configuration-name jncie
set protocols mstp revision-level 1
set protocols mstp interface xe-0/0/10
set protocols mstp interface xe-0/0/11
set protocols mstp interface ae10
set protocols mstp msti 1 bridge-priority 4k
set protocols mstp msti 1 vlan 1-199
set protocols mstp msti 2 bridge-priority 4k
set protocols mstp msti 2 vlan 200-299
root@EX2# show protocols mstp | display set
set protocols mstp configuration-name jncie
set protocols mstp revision-level 1
set protocols mstp bridge-priority 8k
set protocols mstp interface xe-0/0/10
set protocols mstp interface xe-0/0/11
set protocols mstp interface ae10
set protocols mstp msti 1 bridge-priority 8k
set protocols mstp msti 1 vlan 1-199
set protocols mstp msti 2 vlan 200-299
based on the above configuration, I expect to see EX2 to be root bridge for msti 1, right ? But I have the following:
Anything I missed? or some limitation for vQFX for this ?
Also only when I configured EX2 to CST root, can I move msti root to EX1, or EX1 is always root for all MSTi.
Seems the bridge-priority never takes effect on EX2.
thanks in advanced for any insights.