View Only


This community is currently under full moderation, meaning  all posts will be reviewed before appearing in the community. Please expect a brief delay—there is no need to post multiple times. If your post is rejected, you'll receive an email outlining the reason(s). We've implemented full moderation to control spam. Thank you for your patience and participation.

Expand all | Collapse all

QFX5120-48t switch VRRP connectivity with LAG

This thread has been viewed 3 times
  • 1.  QFX5120-48t switch VRRP connectivity with LAG

    Posted 09-24-2021 05:26
    Dear All,

    One of my customers is asking to configure VRRP with three of their servers. One server is Hyper-V and other two are Power VM. The topology would be as below mentioned. Could you please help how can we make connectivity using lacp? and what would be the finest way to configure VRRP?

    Sahil Kalra

    Sahil Kalra

  • 2.  RE: QFX5120-48t switch VRRP connectivity with LAG

    Posted 09-24-2021 05:44
    In VMware the redundant ports to the server are straight layer 2 normal access or trunk ports.   And the Hypervisor takes care of loop prevention and redundancy for the links.

    You will need to verify with HyperV and PowerVM how they manage the switch links.

    Steve Puluka BSEET - Juniper Ambassador
    IP Architect - DQE Communications Pittsburgh, PA (Metro Ethernet & ISP)