Switching

 View Only

IMPORTANT MODERATION NOTICE

This community is currently under full moderation, meaning  all posts will be reviewed before appearing in the community. Please expect a brief delay—there is no need to post multiple times. If your post is rejected, you'll receive an email outlining the reason(s). We've implemented full moderation to control spam. Thank you for your patience and participation.



  • 1.  Empty FPC MX104

    Posted 05-05-2022 11:55
    fter an unexpected rebot juniper ports no longer recognize

    root> show chassis environment
    Class Item Status Measurement
    Temp PEM 0 OK 32 degrees C / 89 degrees F
    PEM 1 Check
    ABB 0 Intake OK 29 degrees C / 84 degrees F
    ABB 0 Exhaust A OK 33 degrees C / 91 degrees F
    ABB 0 Exhaust B OK 35 degrees C / 95 degrees F
    ABB 1 Intake Absent
    ABB 1 Exhaust A Absent
    ABB 1 Exhaust B Absent
    Routing Engine 0 OK 35 degrees C / 95 degrees F
    Routing Engine 0 CPU OK 41 degrees C / 105 degrees F
    Routing Engine 1 Absent
    Routing Engine 1 CPU Absent
    Fans Fan Tray Absent

    root> show chassis fpc
    Temp CPU Utilization (%) CPU Utilization (%) Memory Utilization (%)
    Slot State (C) Total Interrupt 1min 5min 15min DRAM (MB) Heap Buffer
    0 Empty
    1 Empty
    2 Empty

    root> show chassis fpc 0
    Temp CPU Utilization (%) CPU Utilization (%) Memory Utilization (%)
    Slot State (C) Total Interrupt 1min 5min 15min DRAM (MB) Heap Buffer
    0 Empty

    any solution for this case ?



    ------------------------------
    JOSE GEYSON BARROS
    ------------------------------