View Only


This community is currently under full moderation, meaning  all posts will be reviewed before appearing in the community. Please expect a brief delay—there is no need to post multiple times. If your post is rejected, you'll receive an email outlining the reason(s). We've implemented full moderation to control spam. Thank you for your patience and participation.

  • 1.  CRC/Align , Framing errors: errors

    Posted 05-08-2022 09:00


    We are getting CRC/Align Framing errors: errors on interface. Changed the optics and port but problem still persist.
    Input errors:
    Errors: 49331, Drops: 0, Framing errors: 47011, Runts: 0, Policed discards: 0, L3 incompletes: 2320, L2 channel errors: 0, L2 mismatch timeouts: 0, FIFO errors: 0,
    Resource errors: 0
    Output errors:
    Carrier transitions: 11, Errors: 0, Drops: 0, Collisions: 0, Aged packets: 0, FIFO errors: 0, HS link CRC errors: 0, MTU errors: 0, Resource errors: 0
    Bit errors 13
    CRC/Align errors 47011 0
    FIFO errors 0 0
    Total errors 47011 0

    Could it be issue with bad patch cable connected on other side?

    Thanks in advance.

  • 2.  RE: CRC/Align , Framing errors: errors

    Posted 05-08-2022 09:18
    Yes, the crc will occur because some physical element in the patch is a problem.  And it could be on either side device that that the link shares.

    Seems like you have eliminated this side physical elements.

    Steve Puluka BSEET - Juniper Ambassador
    IP Architect - DQE Communications Pittsburgh, PA (Metro Ethernet & ISP)