Switching

 View Only
last person joined: yesterday 

Ask questions and share experiences about EX and QFX portfolios and all switching solutions across your data center, campus, and branch locations.

  • 1.  QFX3500 Performance Question

    Posted 11-03-2020 00:40

    Hello,

    i want to use 2x QFX3500 as virtual chassis as my core switching and i have following featurs :

    10-15gbps bps

    6m pps

    8-9 BGP Peers with no full tables,

    10k Routes in worst case

    40-50k mac address in worst case

    i want to have 6-7 firewall access list to control input traffic and some traffic wchih is forward thought the switch

    2-3x PBR which assign to my Vlan

    700x VLAN and SVI (and each vlan has its own ip or secondary ips)

    i want to know can QFX3500 handle these features perfectly with less cpu usages?

    and i want to know how many SVI can i have in qfx3500 ? for example n3k-c3064pq-10gx suggested that we can have 1024 SVI

    Thank you.



  • 2.  Re: QFX3500 Performance Question

     
    Posted 11-03-2020 23:39

    Hi blackmetal,

     

    QFX3500 in a VC should be able to handle that seemlessly. you can refer the the below doc for scaling limits of QFX3500 and your requirement falls well within the range of that.

     

    https://www.slideshare.net/NamNguyen5/qfx3500 

     

    If this solves your problem, please mark this post as "Accepted Solution".
    If you think that my answer was helpful, please spend some Kudos.

     

    Regards,

     

    Amit