vSRX

 View Only

IMPORTANT MODERATION NOTICE

This community is currently under full moderation, meaning  all posts will be reviewed before appearing in the community. Please expect a brief delay—there is no need to post multiple times. If your post is rejected, you'll receive an email outlining the reason(s). We've implemented full moderation to control spam. Thank you for your patience and participation.



  • 1.  SRX-300 VRRP scenario

    Posted 11-12-2021 05:37
    Hi,

    I have configured the SRX300 to use VRRP in the LAN interfaces, but I am facing an issue where the routers are in the Active/Active. The LAN's interface is connected to Core Switch and I have connectivity between the routers (ping is OK).

    The interface's ge-0/0/0 configuration is following:

    Router-01
    show configuration interfaces ge-0/0/0   
    unit 0 {
        description "CNX LAN";
        family inet {
            address 172.16.3.201/25 {
                vrrp-group 1 {
                    virtual-address 172.16.3.200;
                    priority 200;
                    preempt;
                    accept-data;
                }
            }
        }
    }

    Router-02
    show configuration interfaces ge-0/0/0   
    unit 0 {
        description "CNX LAN";
        family inet {
            address 172.16.3.202/25 {
                vrrp-group 1 {
                    virtual-address 172.16.3.200;
                    preempt;
                    accept-data;
                }
            }
        }
    }

    These routers are configured in the packet-based mode and there are no security zones available.

    My questions are:

    Does the SRX300 support VRRP on the physical interfaces? 
    There is a specific configuration to apply in the SRX300 to enable VRRP on the physical interfaces?

    Thanks,
    TM


    ------------------------------
    Thiago Morais
    ------------------------------


  • 2.  RE: SRX-300 VRRP scenario

    This message was posted by a user wishing to remain anonymous
    Posted 11-13-2021 05:57
    This message was posted by a user wishing to remain anonymous

    Hi,
    We using VRRP a lot without any problems, but in flow mode.